![DIWHY.LIFE](/img/default-banner.jpg)
- 114
- 1 469 125
DIWHY.LIFE
United States
Приєднався 6 лип 2017
Welcome to DIWHY.LIFE DIY videos about photography, video production, home improvement and kids crafts. Embrace your inner DIYer and do it yourself!
Zip ties and Duct tape not included.
www.diwhy.life #diwhy #1121705
Zip ties and Duct tape not included.
www.diwhy.life #diwhy #1121705
This Copper Wire Stripping Tool is Fast!
I didn't plan on making another video about stripping copper wire for scrap value but when I saw a bunch of Romex hanging out of a dumpster near the studio I just couldn't let it go to waste! One thing I know for sure is that if I'm going to do this again, I'm going to use a better tool than a simple utility knife like I did last time. I picked up a wire stripping tool off Amazon for about $40 and it cut my stripping time in half, which also doubled my pay rate from just under $10 per hour with the utility knife to $20 with my new tool. In this video I'll show how to tool works and what I ended up making after stripping almost 20 pounds of wire.
Quick Links
00:00 - Intro
00:36 - My Spirit Animal Revealed
01:12 - Right Tool for the Job
02:28 - Romex Copper Wire Score
02:58 - Stabilizing the Tool
04:20 - Stripping First Test Pieces
06:02 - Stripping 12 Gauge Wire
07:02 - Safety First
07:14 - Weigh In
08:37 - My Local Recycling Center
08:47 - Total $ Earned
Shopping List
Stripping tool - a.co/d/2cQlHfW
Quick Links
00:00 - Intro
00:36 - My Spirit Animal Revealed
01:12 - Right Tool for the Job
02:28 - Romex Copper Wire Score
02:58 - Stabilizing the Tool
04:20 - Stripping First Test Pieces
06:02 - Stripping 12 Gauge Wire
07:02 - Safety First
07:14 - Weigh In
08:37 - My Local Recycling Center
08:47 - Total $ Earned
Shopping List
Stripping tool - a.co/d/2cQlHfW
Переглядів: 48
Відео
How to Fix Stick Drift in a PS4 DualShock Controller
Переглядів 745Місяць тому
Visit iFixit.com for tools, repair kits and everything you need to fix your $*%^! In This video we'll disassemble and clean out a PS4 dual shock controller that has some drift in the right stick. My son recently started using his old PS4 controllers while playing Apex Legends on his CLX gaming PC. He prefers using a controller because the aim assist is pretty forgiving in Apex so the movement h...
How to Key a Master Lock
Переглядів 496Місяць тому
In this video I'll show you how to key a Universal Pin One Key Master Lock System. If you have a lock that a bunch of keys work with and you need to replace the lock, it's fairly quick and easy with this system. Shopping List Master Universal Pin Padlock - a.co/d/chy71XE Master Universal Tool - a.co/d/gpTuiAl @MasterlockCompany #masterlock #locksmith www.masterlock.com/
Fioboc Stay Cool 2.0 T-Shirt Review
Переглядів 120Місяць тому
www.fioboc.com/?ref=WAH20 Use PROMO WAH20 for 25% off your order! In this episode Remi and I will be checking out the Stay Cool 2.0 T-Shirts by Fioboc. These active wear tees are cooling, moisture wicking and super stretchy, get for working out and sports. The size fits me great and I didn't experience much shrinkage after washing. I like the rounded hem at the bottom, it keeps the shirt a touc...
iPhone 8 Battery Replacement with iFixit
Переглядів 639Місяць тому
0🎇 this video I'll replace the battery in my friend's iPhone 8 with an iFixit Battery Replacement Kit. In addition to the tools that come with the kit we'll use the Tech Tray, the I Opener and the iFixit Anti-clamp. Start to finish the project takes about 1 hour to complete, I would recommend watching the video and reading through the repair guide that can be found on the Battery Replacement Ki...
Retrospec Beaumont REV 2 City E-Bike Unboxing Assembly & Review
Переглядів 9632 місяці тому
www.avantlink.com/click.php?tt=cl&merchant_id=62d44d20-c742-49c3-b633-89e0d290ba05&website_id=a79d8a33-b7b7-477d-b1f2-45d58e0e792d&url=https://retrospec.com/collections/electric-city-bikes/products/beaumont-rev-2-electric-city-bike-step-through?variant=42795169185964 In this episode we'll unbox and assemble the all new Beaumont REV 2 City E-Bike by Retrospec. Quick Links 00:11 - Beauty Shots 00...
iFixit Toolkit Unboxing
Переглядів 5272 місяці тому
It's official! I'm a full fledged, card holding (ok, there's no card) iFixit Ambassador! Over the next few months I'll be posting a series of repair videos showing me use all the awesome tools iFixit recently sent me. In this video I unbox the toolkit and see what's inside. IFixit not only offers all kinds of parts, tools and free repair guides for just about anything, they also advocate to get...
Custom QR Code Rubber Stamps for Promos
Переглядів 2374 місяці тому
Custom QR Code Rubber Stamps for Promos
Rechargeable LED Keychain Light Review 👍 or 👎?
Переглядів 4824 місяці тому
Rechargeable LED Keychain Light Review 👍 or 👎?
Fioboc MoveMasters Stretchy Jeans Are DIY Approved
Переглядів 535 місяців тому
Fioboc MoveMasters Stretchy Jeans Are DIY Approved
4 Best Accessories For Your Retrospec Bike
Переглядів 2617 місяців тому
4 Best Accessories For Your Retrospec Bike
Insta360 Go 3 Unboxing & Getting Started
Переглядів 2438 місяців тому
Insta360 Go 3 Unboxing & Getting Started
Removing Swirl Marks on Car Paint with Meguiars
Переглядів 4938 місяців тому
Removing Swirl Marks on Car Paint with Meguiars
Chatham REV+ E-Bike Assembly & Overview
Переглядів 6699 місяців тому
Chatham REV E-Bike Assembly & Overview
Retrospec Chatham REV 2 E-Bike Unboxing & Assembly
Переглядів 1,2 тис.10 місяців тому
Retrospec Chatham REV 2 E-Bike Unboxing & Assembly
$30 Pritech vs $200 Panasonic Electric Razor Shave Off
Переглядів 47410 місяців тому
$30 Pritech vs $200 Panasonic Electric Razor Shave Off
Scratched 360 Camera Lens? Don’t cry 😢 Do This!
Переглядів 3,9 тис.Рік тому
Scratched 360 Camera Lens? Don’t cry 😢 Do This!
Uditer S3 Hub E-Skate Unboxing & Review
Переглядів 564Рік тому
Uditer S3 Hub E-Skate Unboxing & Review
Koa Rev+ Fat Tire E-Bike Unboxing Assembly & Review
Переглядів 2,4 тис.Рік тому
Koa Rev Fat Tire E-Bike Unboxing Assembly & Review
Corgi Approved Outdoor Camping Blanket 🐾
Переглядів 117Рік тому
Corgi Approved Outdoor Camping Blanket 🐾
Cali Vinyl Floor Install & Juxtapose JS
Переглядів 327Рік тому
Cali Vinyl Floor Install & Juxtapose JS
This is exactly what im looking for!!!
Your display is mounted wrong. It should be on there dead center
Good tip, I’ll try moving it over.
Hey, hello from Argentina. One question,i'm planning to do this, but once we do the battery swap, what is the recommended, let the battery FULLY drain after swap then make a full charge? Or just after finishd the work start loading? I assume always let the battery stay between 20% and 80%. I would pay to someone to do this, but shopping will make pay you +90USD for the whole combo.
New batteries are usually pre-charged between 60% to 80%. You’re totally right, you should use your phone down to about 20% and try not to charge it past 80% and definitely don’t plug it in and let it sit plugged in over night. Recently Apple has been adding lots of software to combat bad charging habits so you actually don’t need to worry all that much about it anymore.
@@DIWHYDOTLIFE another question if i may, how often i should do a full charge of the phone, i mean, let it dry, and fully load it from zero to 100?
I just try to stop it around 80% but from time to time I forget to unplug it and it charges to 100% so if you’re forgetful like me from time to time is fine.
@@DIWHYDOTLIFE thanks for taking the time to give an answer man!!
What a sofa. Thinking of getting one myself. How does it feel sfter a longer ride?
👑
Fantastic job, very detailed!
My basket hooks on those front post mounts. Can be bought as an accessory with the bike
By far the best DIY on building inexpensive panels, thanks for sharing
Hey bro, were ur tees classic fit or slim?
Slim I believe.
Helpful
gonna attempt to do this… Do you recommend getting the heat bag and suction tool?
You could probably get away with the tools that come with the battery kit and he heat bag (I opener). The anti-clamp is certainly much easier but the suction cup that comes with the kit is sufficient.
Im thinking about getting an electric skateboard and ive emailed these guys and never heard back. Im a heavier rider and other channels say this board is ok for it. What us your opinion?
It’s good as long as you’re not over 200lbs. I’m 180 and I feel like it could probably safely take another 20ish pounds? I’ve seen pics of the rear truck snapping so I try to be careful hitting big bumps.
What is the diameter of the ABS pipe
4 inch, links in the description
Hey is there anyway to get measurements I don’t have a printer and want to use the template?
Yep, my first beer box cowboy hat was done from measurements: ua-cam.com/video/Nr89hI9ttmw/v-deo.htmlsi=EbV3XUrwL9RcsWy4
You didn't brick your red controller at all, what are you talking about? Just solder a new connector on there, you're supposed to be a DIY channel!
Bro you are 11 years late
How to fix Stick drift on PS4 controller Step 1: Buy a PS5
OH My this is the best. Thank you for sharing, I have been looking for months for a way to divide a room, I rent so did not want to drill walls. THANK YOU!!!!
Thanks for sharing this. We just started getting stick drift on one of our PS4 controllers and your guide gave me the confidence to have a go at fixing it myself. Now if only I can find the time to try it out!
You got this!
$20/hr without payroll taxes is equivalent to $25/hr on a paycheck. About 60% of Americans make less per hour. It's illegal in Arizona to sell wire without a contractors license to cut down on the homeless stripping houses, so sales may not be easy everywhere.
Good info. 👍
Please make video on how to encourage a stubborn scottie into the trailer LOL.
Ha ha!
Just used your video to assemble my same trailer. Thank you! Boy the included instructions were tricky, since you know sometimes you get partially assembled bits, so i didnt know how to even pull out those pegs… anyway, you saved the day!
Nice! Glad it was helpful.
It would be nice if you figured out how to actually take a video that showed assembly versus just hearing you talk. You also didn't complete the process and attaching it to the bike. I will have to look for some other instructional video
This was an experiment with live video. My apologies if it doesn’t show the steps that well. Halfway through I realized the thing was too big for my camera setup. If I do live videos in the future I’ll stick to small easy things. ✌️
How do i get it
Subscribe and I’ll make an announcement before my next giveaway.
@@DIWHYDOTLIFEok
This only works if the metal isn’t scraped away
Good to know, thanks!
could you provide links to the tools used in the video?
I just added links to all the tools in the description. Keep in mind the kits are 20% off not the individual tools. This kit has most of them and is on sale: www.ifixit.com/products/essential-electronics-toolkit
@@DIWHYDOTLIFE thanks a lot
Just in time !❤ My 8 is losing steam 🎉
Yep, $35 gets you 3 more years!
My iPhone 8 is losing battery power faster everyday after having it 6 yrs. I found if I turn to display brightness way down and shutoff the Wi-Fi and Bluetooth,it actually helps a lot. However, I am one of those few that almost never carries my phone or leaves it on . I existed for decades with a phone wired to the wall and now over the last decade, it seems the world resists that attitude.
this worked really well with everyday cardboard surprisingly! Just took some extra bends xb but this tutorial is AWESOME!! Helped a lot with the cosplay I'm working on for my friend :3
💪
TK421! 🤦♂
👍
It's an awful brand with trashy, insecure products that you better avoid. Don't give them money, and get rid of any of their products.
I’m sure there’s truth to this statement, but it depends on what you’re using it for. I wouldn’t lock my e-bike with one and walk away but it does a good job keeping dumpster divers out of the trash area.
Hi, you mentioned an alternative method of doing this using a LiDar camera. Is there an advantage of doing this with a regular camera as opose to a Lidar camera?
This particular app is photo-based so I don’t think Lidar would be of any benefit. I just got an iphone15 pro so I’ll be trying other apps that use its functionality.
Thanks for getting back to me. I see. Yes I'd love to see what you think of the results. I have a LiDar camera on my iphone 12 and when I did some video scanning I wondered if it would put an end to photo based scanning.
I just downloaded Polycam which utilizes LiDar enabled devices. I’ll post a first impressions video soon.
Where did you get the key from?!?
Already had it. That’s typically why you would want to key a lock, you have the key but the lock is missing or broken.
*Had no idea such a customisable lock existed,* so fkn cool! 🤙🏽🤟🏽🤙🏽
Few years ago Lock Picking Laywer made video about that lock and how it works ua-cam.com/video/IaqnKIED_Ns/v-deo.html
Lets serious and turn this into something that might actually become a defensive tool. What if we replaced the toilet paper with cayenne pepper ? Imagine filling that tube up with cayenne and pulling the trigger. Of course you would only use this in the case you were being attacked by some wild critter.
I’d likely end up rubbing my eyes at some point and throwing the whole mess away. Why do eyes mysteriously become itchy the moment your fingers touch something spicy???
Great review! More nipples than I expected.
I don't know why this video doesn't have at least 10x the number of views, it's one of the best videos explaining how to use RealityScan!
It's not a fixie anymore, traitor!
Ha ha! Technically never was! ✌️
*My eyes when the sparks turned into a tiny flame* 👀😱
💨 Nothing to see here! 💨
Exactly what I needed. Thank you for sharing 😊
Thank you for the support over the years! I'm going through videos in an effort to improve and after rewatching this, I realized how difficult this process can be to translate all of the steps. Fantastic work brother!
Great Video * thank you :)
DIY Acoustic Partitions
Thanks for that. Worked well on my X3
Great to hear!
perfect!!!
i have a 24 pack of twisted tea. do i need multiple cases to make it or is the one enough? i don’t mind getting more cases it gives me a reason to drink😎
It depends if you want the underside of the brim to be nice and not cardboard. I’d get another 24.👍
Try not to get too twisted tho!🤣
@@DIWHYDOTLIFE i made it and it turned out terrible 🙂 i must retry
The good news is you get better at it. The good news is you’re going to have to throw a party to get through all that TT. The good news is you’ll have the coolest party hat! 🤠
@@DIWHYDOTLIFE you’re so right. it’s the shaping part that kinda looks bad but 🤷🏼♀️
Hi, I’ve been looking for a way to give height to my Shoji screens while keeping them easy to move. Your video is a great idea. Can you recommend something to use that would provide for 10” of increased height? The piping isn’t enough for my space.
So you want some extensions for the legs to raise it higher? I might have an idea, gimmie a day or two to draw up my idea…
Thanks Bro!
This is perfect! Thank you for sharing!
That must a heavy tank or an light tank?
I wish, turns out it was from an asphalt grinder.
Check out COB led strips
Just learned about chip on board, I did a video on a COB keychain light. Extremely bright!